Custom-geometry flexible heater
Multi-zone heater with cutouts
Flexible heater layouts with irregular outlines, clearance windows, and independently controlled zones so heat follows the part. Leads can be flying leads, terminals, or a custom harness.
Published specification
| Parameter | Published value |
|---|---|
| Outline | Irregular, following the part |
| Clearance | Clearance windows |
| Zones | Independently controlled zones |
| Leads | Flying leads, terminals, or a custom harness |
| Dielectrics | Polyimide film or silicone rubber |
| Watt density | 0.1–1.5 W/cm² typical design window |
Where this applies
Parts that cannot use a rectangular heater and need clearance windows or more than one heated zone.
Zone count and outline come from the drawing. The watt-density window is the published typical range for the heater family. It is not a per-zone rating.
Questions
Can one heater have more than one zone?
Yes. The hub publishes independently controlled zones, plus irregular outlines and clearance windows.
Which dielectrics can this geometry use?
The published dielectrics are polyimide film and silicone rubber.
Enquiry
Ask for this specification.
Send the operating point, mounting, and any drawing. We typically reply within 24–48 hours with what this construction can and cannot cover.