Silicone rubber heater
Silicone rubber heater pad
Silicone rubber heater for moisture-prone or high-vibration mounting, with wire leads, connectors, and thermal cutouts available inside the published −40 °C to 200 °C envelope.
Published specification
| Parameter | Published value |
|---|---|
| Dielectric | Silicone rubber |
| Environment | Moisture-prone or high-vibration |
| Options | Wire leads, connectors, and thermal cutouts |
| Operating temperature | −40 °C to 200 °C, construction dependent |
| Voltage options | 12 V, 24 V, 48 V, or 110–240 V AC |
| Watt density | 0.1–1.5 W/cm² typical design window |
Where this applies
Surfaces that see moisture or vibration and need a conformable pad rather than a thin polyimide film.
Silicone rubber is the published rugged construction for moisture and vibration. Voltage choices and the watt-density window are the hub envelope. They are confirmed per drawing, not as a single catalogue wattage.
Questions
When is silicone the published choice?
For moisture-prone or high-vibration environments, as a conformable pad with leads, connectors, or thermal cutouts.
Which voltages are listed?
12 V, 24 V, 48 V, and 110–240 V AC, as the hub's voltage options.
Enquiry
Ask for this specification.
Send the operating point, mounting, and any drawing. We typically reply within 24–48 hours with what this construction can and cannot cover.